MIL-PRF-81904C(AS)
CAUTION
HARMFUL VAPOR.
USE ONLY WITH ADEQUATE VENTILATION.
AVOID PROLONGED BREATHING OF VAPOR.
AVOID PROLONGED OR REPEATED CONTACT WITH SKIN.
KEEP AWAY FROM HEAT AND OPEN FLAME.
3.10.2 Component B (catalyst) containers. All containers of toxic and hazardous
chemicals and materials shall be labeled in accordance with the applicable federal, state,
and municipal laws, statutes, regulations, and ordinances. In addition to the labeling
specified in 49 CFR 171-178, the following labeling shall appear on each container and
on each exterior shipping container:
CAUTION: OXIDIZING MATERIAL, STRONG IRRITANT. HARMFUL IF
SWALLOWED.
· AVOID CONTACT WITH SKIN AND EYES. IN CASE OF CONTACT, FLUSH
IMMEDIATELY WITH PLENTY OF WATER. FOR EYES, GET MEDICAL
ATTENTION. IN CASE OF INGESTION, CALL A PHYSICIAN IMMEDIATELY. IN
CASE OF CONTAINER LEAKAGE, REMOVE TO A SAFE PLACE, OUTDOORS.
3.11 Workmanship. The coating shall be processed in such a manner that
produces the highest quality material necessary to meet the requirements of this
specification. All components shall be free of solvents, uniform in quality and
consistency after stirring, and free of agglomerates or foreign particles. There shall
be no other defects present that inhibit the end product from performing its intended
purpose.
4. VERIFICATION
4.1 Classification of inspection. The inspection requirements specified herein are
classified as follows:
a. Qualification inspection (see 4.3).
b. Conformance inspection (see 4.4).
4.2 Inspection conditions. Unless otherwise stated in the test methods or
paragraphs herein, all inspections shall be conducted at a room temperature of 70 ±10° F
(21 ±5° C) and a relative humidity of 50 ±10 percent.
4.3 Qualification inspection. Qualification inspection shall consist of all the tests
and examinations specified in this specification (see 6.3).
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business