MIL-PRF-83483E
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification presents requirements for one type of anti-seize thread
compound composed of molybdenum disulfide and petrolatum.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, or 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3 or 4 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
FEDERAL SPECIFICATIONS
VV-P-236
Petrolatum, Technical
(Copies of this document are available online at https://quicksearch.dla.mil .)
2.3 Non-government publications. The following documents form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
ASTM, INTERNATIONAL
ASTM D217
Standard Test Methods for Cone Penetration Of Lubricating Grease
(DoD Adopted)
ASTM D2709
Standard Test Method for Water and Sediment in Middle Distillate Fuels
by Centrifuge (DoD Adopted)
ASTM D4057
Standard Practice for Manual Sampling of Petroleum and Petroleum
Products (DoD Adopted)
(Copies of these documents are available online at https://www.astm.org )
SOCIETY OF AUTOMOTIVE ENGINEERS (SAE)
SAE-AMS-M-7866
Molybdenum Disulfide, Technical Lubrication Grade (DoD Adopted)
(Copies of these documents are available online at https://www.sae.org )
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein (except for related specification
sheets), the text of this document takes precedence. Nothing in this document, however, supersedes
applicable laws and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 Toxicity. The materials shall have no adverse effect on the health of personnel when used
for their intended purpose.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business