MIL-S-7916 SEALING COMPOUND, THREAD AND GASKET, FUEL, OIL, AND WATER RESISTANT S/S BY SAE-AS-S-7916SEALING COMPOUND, THREAD AND GASKET, FUEL, OIL, AND WATER RESISTANT S/S BY SAE-AS-S-7916

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10

NOT MEASUREMENT SENSITIVE

MIL-S-7916D

28 June 1994

SUPERSEDING

MIL-S-7916C

16 May 1973

MILITARY SPECIFICATION

SEALING COMPOUND, THREAD AND GASKET, FUEL, OIL, AND WATER RESISTANT

This specification is approved for use by all

Departments and Agencies of the Department

of Defense.

1.  SCOPE

1.1  Scope.  This specification establishes the requirements for sealing compounds used on threads and gaskets.

2.  APPLICABLE DOCUMENTS

2.1  Government documents

2.1.1  Specifications and standards.  The following specifications and standards form a part of this document to the extent specified herein.  Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (See 6.2b).

SPECIFICATIONS FEDERAL

P-D-680      -    Dry Cleaning and Degreasing Solvent

QQ-A-250/4   -    Aluminum Alloy 2024, Plate and Sheet

Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to:  Commanding Officer, Naval Air Warfare Center Aircraft Division, Code SR3, Highway 547, Lakehurst, NJ  08733-5100, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.

AMSC N/A                                                           FSC 8030

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

PPP-C-96     -    Can, Metal, 28 Gage and Lighter

PPP-T-1637   -    Tube, Shipping, Collapsible

MILITARY