INCH-POUND
L-T-80C
13 November 2013
SUPERSEDING
L-T-80B
01 October 1971
FEDERAL SPECIFICATION
TAPE, PRESSURE-SENSITIVE ADHESIVE
(ALUMINUM-BACKED)
The General Services Administration has authorized the use of this federal specification, by all
federal agencies.
1. SCOPE AND CLASSIFICATION
1.1 Scope. This specification establishes the requirements for an aluminum foil backed pressure-
sensitive adhesive tape designed for use in sealing applications where the properties of good weather
resistance, reflectivity, and moisture vapor transmission resistance are required.
1.2 Classification. This specification covers the following types of pressure-sensitive tapes (see 6.2).
1.2.1 Type I. Aluminum foil backed pressure-sensitive adhesive tape No release liner.
1.2.2 Type II. Aluminum foil backed pressure-sensitive adhesive tape With release liner.
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any data that
may improve this document should be sent to: Director, U.S. Army Research Laboratory, Weapons
and Materials Research Directorate, Specifications and Standards Office, Attn: RDRL-WMM-D,
Aberdeen Proving Ground, MD 21005-5069 or emailed to richard.j.squillacioti.civ@mail.mil.
Since contact information can change, you may want to verify the currency of this address
information using the ASSIST Online database at https://assist.dla.mil/.
AMSC N/A
FSC 8030
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business