MIL-P-47215B (MI)
When the gross weight is greater than 200 pounds or the container length and width is greater than 48 inches by 24 inches and the weight is greater than 100 pounds, 3 inch by 4 inch skids (laid flat) shall be applied in accordance with requirements of the container specifications PPP-B-585 and PPP-B-601.
5.2.2 Level B. The level B packaged items shall be packed in fiberboard containers, conforming to PPP-B-636, class weather resistant. Closures shall be in accordance with the appendix thereto.
5.2.3 Level C. The level C packaged items shall be packed in accordance with requirements of MIL-STD-1190.
5.2.4 Unitized loads. Unitized loads, commensurate with the level of packing specified in the contract or order, shall be used whenever total quantities for shipment to one destination equal 40 cubic feet or more. Quantities less than 40 cubic feet need not be unitized. Unitized loads shall be uniform in size and quantities to the greatest extent practicable.
5.2.4.1 Level A. Items, packed as specified in 5.2.1, shall be unitized on pallets in conformance with MIL-STD-147, load type I, with fiberboard cap (storage aid 4) positioned over the load.
5.2.4.2 Level B. Items, packed as specified in 5.2.2, shall be unitized as specified in 5.2.4.1 except that the fiberboard caps shall be class domestic.
5.3 Marking.
5.3.1 Levels A and B. In addition to any special or other identification marking required by the contract (see 6.2), each unit pack, intermediate and exterior container and unitized load shall be marked in accordance with MIL-STD-129.
5.3.2 Level C. Industrial marking shall be in accordance with the requirements of MIL-STD-1190.
5.4 General.
5.4.1 Exterior container. Exterior containers (see 5.2.1, 5.2.2 and 5.2.3) shall be of a minimum tare and cube consistent with the protection required and shall contain equal quantities of identical stock numbered items to the greatest extent practicable.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business