MIL-PRF-907F
DEPARTMENT OF DEFENSE STANDARDS
MIL-STD-1916 - DoD Preferred Methods for Acceptance of Product.
FEDERAL STANDARDS
FED-STD-791 - Lubricants, Liquid Fuels and Related Products; Methods of Testing.
(Copies o f these documents are available online at https://assist.daps.dla.mil/quicksearch or
dodssp.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government
documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
BUREAU OF MEDICINE AND SURGERY (BUMED)
BUMED INST 6270.8 - Procedures for Obtaining Health Hazard Assessments Pertaining to
Operational Use of a Hazardous Material.
(Copies of this document are available online at https://bumed.med.navy.mil or from Bureau of Medicine
and Surgery, Department of the Navy, 2300 E Street, NW, Washington, DC 20372-5300.)
NAVAL SEA SYSTEMS COMMAND (NAVSEA)
S9510-AB-ATM-010 Rev 2 of 30 July 1992 - Nuclear Powered Submarine Atmosphere
Control Manual.
(Copies of this document are available from the Naval Sea Systems Command, Code SEA 05Z9, 1333
Isaac Hull Avenue, SE, Stop 5133, Washington Navy Yard DC 20376-5133.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
ASTM INTERNATIONAL
ASTM A 109
- Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-
Rolled. (DOD adopted)
ASTM A 193
- Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for
High-Temperature Service. (DOD adopted)
ASTM A 194
- Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High
Pressure or High Temperature Service, or Both. (DoD adopted)
ASTM A 515
- Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate-
and Higher-Temperature Service. (DOD adopted)
(Copies of these documents are available from www.astm.org or ASTM International, 100 Barr Harbor
Drive, West Conshohocken, PA 19428-2959.)
2.4 Order of precedence. In the event of a conflict between the text of this document and the references
cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable
laws and regulations unless a specific exemption has been obtained.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business