INCH POUND
MIL-S-83318A(USAF)
27 MARCH 1991
SUPERSEDING
MIL-S-83318(USAF)
29 AUGUST 1988
MILITARY SPECIFICATION
SEALING COMPOUND, LOW TEMPERATURE CURING, QUICK REPAIR INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES
This specification is approved for use by the Department of the Air Force and is available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a two component, temperature-resistant -65°F to +250°F (-54°C to
+120°C), low temperature (20°F minimum) curing synthetic rubber compounds for quick repair of aircraft integral fuel tanks and fuel cell cavities. During application, the sealing compounds shall be a suitable, fluid consistency
1.2 Classification. The sealing compound shall be of the following classes, as specified (see 6.2).
a. Class A - Sealing material, suitable for brush application.
b. Class B - Sealing material, suitable for application by extrusion-gun and spatula
1.2.1 Dash numbers. The following dash numbers shall be used to designate the minimum application time in hours:
a. Class A dash numbers shall be -1/6. b. Class B dash numbers shall be -1/6.
The sealing compound shall be thus identified as either A-1/6 or B-1/6.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: ASD/ENES, Wright-Patterson AFB, Ohio 45433-6503 by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter.
AMSC N/A FSC 8030
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business