INCH-POUND
MIL-DTL-82633A (OS)
10 February 2011
SUPERSEDING
MIL-C-82633(OS)
27 August 1973
DETAIL SPECIFICATION
COMPOUND, POLYMERIC ELASTOMER, THERMOSETTING
This specification is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available
for use by all departments and agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a two-part, cured-in-place, polymeric thermosetting compound
having elastomeric and thermal properties for sealing or padding the tail portion of the explosive cavities
of bombs. Curing takes place at room temperature with a minimum of exotherm.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements of
documents cited in sections 3, 4, or 5 of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
INTERNATIONAL STANDARDIZATION AGREEMENTS
STANAG 4240
Liquid Fuel/External Fire, Munition Test Procedures
(Copies of this document are available from NATO/MAS, Bvd Leopold 111, 1110 Brussels, BE online at
https://assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins
Avenue, Building 4D, Philadelphia, PA 19111-5094.)
Comments, suggestions, or questions on this document should be addressed to DEPARTMENT OF THE
NAVY, Indian Head Division, NSWC, E12AP, Document Control, 4123 Artisans Court, Suite 103, Indian
Head, MD 20640-5085 OFFICIAL BUSINESS, or emailed to amanda.penn@navy.mil. Since contact
information can change, you may want to verify the currency of this information using the ASSIST Online
database at https://assist.daps.dla.mil.
AMSC N/A
FSC 8030
DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business