MIL-PRF-24176C
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-DTL-24441 - Paint, Epoxy-Polyamide, General Specification for.
MIL-PRF-24647 - Paint System, Anticorrosive and Antifouling, Ship Hull.
(Copies of these documents are available online at https://assist.daps.dla.mil/quicksearch or
www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D,
Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. The following other Government
documents, drawings, and publications form a part of this document to the extent specified herein. Unless
otherwise specified, the issues of these documents are those cited in the solicitation or contract.
BUREAU OF MEDICINE AND SURGERY (BUMED)
BUMED INST 6270.8 - Procedures for Obtaining Health Hazard Assessments Pertaining to
Operational Use of a Hazardous Material.
(Copies of this document are available online at https://bumed.med.navy.mil or from Bureau of Medicine
and Surgery, Department of the Navy, 2300 E Street, NW, Washington, DC 20372-5300.)
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQC Z1.4 - Sampling Procedures and Tables for Inspection by Attributes. (DoD
adopted)
(Copies of this document are available from www.asq.org or American Society for Quality,
600 North Plankinton Avenue, Milwaukee, WI 53203.)
ASTM INTERNATIONAL
A 109 - Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-
Rolled. (DoD adopted)
B 209 - Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate. (DoD
adopted)
B 584 - Standard Specification for Copper Alloy Sand Castings for General Applications.
(DoD adopted)
C 531 - Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of
Chemical-Resistant Mortars, Grouts, Monolithic Surfaces and Polymer Concretes.
(DoD adopted)
D 695 - Standard Test Method for Compressive Strength of Carbon and Graphite. (DoD
adopted)
D 2240 - Standard Test Method for Rubber Property - Durometer Hardness. (DoD adopted)
(Copies of these documents are available from www.astm.org or ASTM International, 100 Barr Harbor
Drive, West Conshohocken, PA 19428-2959.)
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business