MIL-PRF-81309 Corrosion Preventive Compounds, Water Displacing, Ultra-Thin FilmThis specification covers the requirements for three types and two classes containing two grades of propellants of ultra-thin film, water displacing, corrosion preventive compounds which may be applied by dipping, spraying, brushing or by spraying from self-pressurized containers \(see 6.1\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11

MIL-PRF-81309G

carcinogens, as defined by the National Toxicology Program's Annual Report on Carcinogens.

Prior to listing on the Qualified Products List, the manufacturer shall obtain a satisfactory

toxicity review from Navy and Marine Corps Public Health Center (NMCPHC) using (see 4.3.1

and 6.4). In addition, an Material Safety Data Sheet (MSDS) for the compound shall be prepared

and submitted to the Qualifying Activity.

3.4 Environmental compatibility. The compound shall contain no Class I or II Ozone

Depleting Substances as specified in 40 CFR 82. The compound shall contain no Hazardous Air

Pollutants (HAPS) as defined in 40 CFR 61.

3.5 Mildew inhibitor additive for Type I. The composition of Type I shall contain 0.5 percent

of mildew inhibitor additive (Omacide 100) or equivalent as approved by the qualifying activity

(see 6.3.1).

3.6 Performance characteristics. The corrosion preventive compound shall conform to the

requirements in Table I when tested in accordance with Table II.