MIL-C-47244A (MI)
nozzle and at a distance of 7 ± 1 nozzle exit diameters from the nozzle exit. The test
panel shall be allowed to cool to room temperature. Minimum thickness of the
impinged area shall then be measured. Loss of resin system from the test panel shall
be not more than 0.080 inch.
4.6.13 Shelf life. The base resin and curing agent shall be tested for
conformance with all applicable requirements specified herein after completion of the
6 month storage period. The supplier's certificate of compliance with 3.3.13 may be
accepted during the storage period.
4.6.14 Workmanship. The coating covered by this specification shall be
homogeneous and free of foreign materials. Containers shall be clean, uniformly
filled, well-sealed and legibly marked (see 3.3.14).
4.6.15 Preservation, packaging, packing, and marking. The preservation,
packaging, packing, and marking shall be examined to determine compliance with
Section 5.
4.6.16 Inspection of packaging. The sampling and inspection of preservation,
packaging, and container marking shall be in accordance with the requirements of
PPP-C-2020.
5. PACKAGING
5.1 Preservation, packaging, packing, and marking. Preservation, packaging,
packing, and marking shall be Level A or B in accordance with PPP-C-2020.
5.2 Marking. In addition to any special marking required by the contract or
purchase order (see 6.2), such as shelf life, storage and cure date markings, unit
packages, intermediate packages, and shipping containers shall be marked in
accordance with the requirements of MIL-STD-129.
6. NOTES
(This section contains information of a general or explanatory nature that may
be helpful, but is not mandatory.)
6.1 Intended use. The material covered by this specification is intended for use
as an ablative resistant deck coating and thermal insulation. Up to a resin thickness of
0.200 inch can be applied to vertical surfaces without subsequent flow.
6.2 Acquisition requirements. Acquisition documents must specify the
following:
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business