MIL-C-47244A (MI)
unless disapproved by the Government. The Government reserves the right to perform
any of the inspections set forth in this specification where such inspections are deemed
necessary to ensure supplies and services conform to prescribed requirements.
4.1.1 Responsibility for compliance. All items shall meet all requirements of
sections 3 and 5. The inspection set forth in this specification shall become a part of
the contractor's overall inspection system or quality program. The absence of any
inspection requirements in the specification shall not relieve the contractor of the
responsibility of ensuring that all products or supplies submitted to the Government for
acceptance comply with all requirements of the contract. Sampling inspection, as part
of manufacturing operations, is an acceptable practice to ascertain conformance to
requirements, however, this does not authorize submission of known defective
material, either indicated or actual, nor does it commit the Government to accept
defective material.
4.2 Classification of inspections. The inspection requirements specified herein
are classified as follows:
a.
First article inspection (see 4.3).
b.
Quality conformance inspection (see 4.4).
4.3 First article inspection. First article inspection shall be conducted only on
the first article sample and shall consist of all the examinations and tests specified
herein.
4.4 Quality conformance inspection. Quality conformance inspection for
acceptance of the resin system shall consist of the examinations and tests shown in
table II.
TABLE II. Quality conformance inspection.
Examination and tests
Requirement
Test paragraph
paragraph
Appearance
3.3.1
4.6.1
Specific gravity
3.3.2
4.6.2
Application time
3.3.3
4.6.3
Flow
3.3.4
4.6.4
Hardness
3.3.5
4.6.5
4.4.1 Lot size. Lot size shall consist of all the resin system submitted for
acceptance at the same time which has been prepared by the same company without
change in materials or processes in one continuous period of operation.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business