MIL-DTL-3301D
MIL-M-14745
Minol-2 Composition
MIL-E-22267
Explosive Compositions, HBX Type
(Copies of these documents are available online at https://assist.daps.dla.mil/ or from the Standardization
Documents Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
2.2.2 Other Government documents, drawings, and publications. This section is not applicable to
this document.
2.3 Non-Government publications. The following documents form a part of this document to the extent
specified herein. Unless otherwise specified, the issues of the documents are those cited in the solicitation
or contract.
AMERICAN SOCIETY FOR QUALITY (ASQ)
ANSI/ASQ Z1.4
Sampling Procedures and Tables for Inspection by Attributes
(Copies of ANSI/ASQ Z1.4 are available online at www.asq.org or ASQ Distribution Center, 5131 S.
Third Street, Milwaukee, Wisconsin 53207-6028.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D5
Test Method for Penetration of Bituminous Materials
ASTM D36
Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM D92
Test Method for Flash and Fire Points by Cleveland Open Cup
ASTM D140
Standard practice for sampling Bituminous Materials
(Copies of these documents are available online at https://www.astm.org or from the American Society for
Testing and Materials Customer Service, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
2.3 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a
specific exemption has been obtained
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample (see 6.3) shall be subjected to first article
inspection in accordance with 4.2. A first article inspection shall be required if :
a. There has been more than 12 months since production of the latest accepted lot,
b. There has been a relocation of the production facility,
c. There has been a major change in personnel or procedures, or
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business