MIL-PRF-23586F
forwarded to the qualifying laboratory, specified in the qualification authorization letter. The
samples shall be plainly and durably marked with the following information:
Sample for Qualification Test
SEALING COMPOUND, ELECTRICAL, SILICONE RUBBER, ACCELERATOR
REQUIRED
MIL-PRF-23586F
Type
Class
Grade
Date of shipment
Name and address of manufacturer
Manufacturer's identification of item (base, curing agent and primer, as required)
Submitted by (name) (date) for qualification test in accordance with the requirements of
MIL-PRF-23586F under authorization (reference authorizing letter).
4.2.2 Manufacturer's data.
4.2.2.1 Test reports. Two copies of the manufacturer's test report, containing complete test
data showing that material submitted for qualification conforms to the requirements of this
specification, shall be submitted with qualification samples. Location and identity of the plant that
produced the samples tested shall also be supplied.
4.2.2.2 Instructions for use. Duplicate copies of the manufacturer's instructions for use of the
compound and the appropriate primer shall be furnished with the qualification samples for approval.
4.3 Conformance inspection.
4.3.1 Source inspection. Materials acquired by the Government under this specification shall
be source inspected to ensure conformance prior to shipment. Sealing compound shall be packaged
in approved units of issue (see 3.4).
4.3.2 Lot formation. Unless otherwise specified herein or in the contract, a lot shall consist of
all the sealing compound formulated from the same components, under essentially the same
conditions, forming a part of one contract or order, and submitted for acceptance at one time.
4.3.3 Sampling. Containers shall be selected at random to allow preparation of specimens for
the tests specified in table IV. The samples shall be examined and tested as specified in 4.3.4.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business