MIL-PRF-8516G
4.3.1 Qualification inspection samples. Qualification test samples shall consist of 6 quarts
of the base compound, together with the required quantity of curing agent, of the type and class
for which qualification inspection is desired. The samples shall be furnished in units of issue as
specified in 3.2.2.1 and forwarded to the test facility identified in the letter of authorization to
submit samples (see 6.3). The samples shall be plainly and durably marked with the following
information:
·
Sample for Qualification Test
·
SEALING COMPOUND, SYNTHETIC RUBBER, ELECTRIC CONNECTORS AND
ELECTRIC SYSTEMS, CHEMICALLY CURED
·
Specification MIL-PRF-8516G
·
Type, Class, and Category
·
Date of manufacture
·
Name and address of manufacturer
·
Plant address which produced the compound
·
Manufacturer's product identification
·
Submitted by (name and date) for qualification in accordance with the requirements of
MIL-PRF-8516G under authorization (reference authorizing letter).
4.3.2 Other information. The contractor will be required to submit other information
pertaining to the qualification sample as directed by the qualifying activity (see 6.3.1).
4.4 Conformance inspection. Materials acquired by the Government under this
specification shall be source inspected to ensure the material meets the conformance inspection
prior to shipment from the manufacturer's plant. When required (see 6.2), conformance test
samples shall be packaged and mixed in the units of issue as specified in 3.2.2.
4.4.1 Lot formation. Unless otherwise specified by the procuring activity (see 6.2), a lot
shall consist of sealing compound of the same type and class, produced at one time from one
batch, forming a part of one contract or order, and submitted for inspection at one time.
4.4.2. Sampling. A sufficient amount of sealing compound and curing agent to allow the
preparation of test specimens required in 4.4.3 shall be randomly selected from each lot and
tested as specified in 4.4.3.
4.4.3 Examination. Two specimens for each test shall be prepared from the material
selected in accordance with 4.4.2 and tested in accordance with table IV. The samples may also
be subjected to any other test specified herein when required by the procuring activity (see 6.2).
Nonconformance with any specified requirement shall be cause for rejection of the lot
represented by the sample.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business